VCRC Bike

The dreaded Mavic squeal!!

2012-02-03T11:38:00.000-08:00

Many Mavic wheel owners know that familiar noise, the high pitched squeal that happens when coasting. But what causes it? Is it the bearings? Not likely.

Mavic freehubs are known to squeal but it is not because of the bearings. The freehub uses a nylon bushing and one bearing while most freehubs use multiple bearings and definitely no nylon bushing.

The nylon bushing squeals when it is dry. Mavic recommends taking the freehub off and lubing the bushing (with oil, I personally use chainlube) every 1500 miles or so.

So if this servicing hasn't been done with your freehub, you get the dreaded squeal. Also, if it hasn't been lubed properly it will wear out and you have to replace the whole freehub OR you can replace just the bushing. There are aftermarket bushings available on eBay. Just search for "mavic bushing" on eBay.

Mavic will never tell you that you can replace just the bushing as they want you to buy a whole new freehub for around $70.

So the next time your Mavic wheels start to squeal, remove the freehub and do some maintenance.

Lots of exciting news for 2012

2012-01-24T17:42:00.000-08:00

Lots of new and exciting stuff for 2012.

Our custom team kit program is going well. Quite a few teams have taken advantage of our great prices and quick times!
New BB types! As many of you know, the cycling industry hates a "standard" and there are roughly 10 different BB types in use. We have tried to keep up and have recently closed the gap with the release of our ceramic Press Fit BB30. Shortly after we released our ceramic BB86/SRAM unit for all you Giant/Scott SRAM lovers. Plus, all the ceramic BBs we've been known for are still kicking butt, Shimano 10, SRAM (GXP) regular BB30, BB90, etc. You can check all of them out right here!
We've got some other new projects in the works for 2012. Should be a great year!!

New 2012 Stems with Ti bolt option!

2011-07-25T11:08:00.000-07:00

Our new 2012 VCRC stems have been released. These are updated from last year with the option to have Ti bolts!! Save some weight while looking good!

http://www.vcrcbike.com/category_s/30.htm

Swiftwick Cycling Socks now available!

2011-07-19T13:48:00.001-07:00

Team Kits Releasing Soon!

2011-06-10T16:36:00.000-07:00

Deal of the Day Postings

2011-03-30T13:56:00.001-07:00

Since the racing season is now underway, we've been posting a "deal of the day" promotion. These are some of our most popular products- ceramic BBs, handlebars, stems, basically what most of our customers upgrade on their bikes. The deals change often so keep an eye on this link for the current deal(s)!

http://www.vcrcbike.com/category_s/77.htm

We've lightened our BB!

2011-02-18T18:34:00.001-08:00

If you are a gram counter, then our already light ceramic BB just got even better. We now have a lighter center sleeve option for you weight weenies!!

With the new sleeve, the weights are:

Shimano 10 Ceramic - 89g (regular weight is 93g)

SRAM Road Ceramic - 94g (regular weight is 98g)

Compare those weights to the competition! We're lighter than most FULL ceramic BBs, not to mention other hybrid ceramic BBs!

Check out our BBs here: http://www.vcrcbike.com/category_s/29.htm

2011 VCRC Ceramic Bearings for BB/Wheels/Pulleys

2011-02-15T16:04:00.000-08:00

2011 VCRC Ceramic Bearings for BB/Wheels/Pulleys

New VCRC TEAM Bottle Cages

2010-12-20T16:35:00.000-08:00

New VCRC TEAM Bottle Cages now in stock! A great looking upgrade!

http://www.vcrcbike.com/2011_VCRC_TEAM_Bottle_Cage_p/2011teamcage.htm

PRO Bar and Stem Combo Deal...only $88!

2010-12-13T21:39:00.000-08:00

We haven't lost our minds, we're just offering a smoking good deal!

Now is the time to upgrade the front end of your bike!

CX Magazine Reviews our Team Bar/Stem

2010-11-05T22:14:00.000-07:00

Check out the review at CX Magazine!

VCRC is now a USAC Member Benefits Provider

2010-10-17T11:41:00.000-07:00

We are happy to announce that we've teamed with USA Cycling to provide benefits to their members. We also will donate a portion of our USAC sales back to USAC!

New 2011 Ceramic BBs just released!

2010-09-30T13:31:00.001-07:00

Our new 2011 Ceramic BBs have just been released. New for 2011 are lowered weights, improved bearings and we've brought back colored cups!

Check them out here: http://www.vcrcbike.com/category_s/29.htm

2010-07-31T07:03:00.001-07:00

Some comments from happy customers...

2010-07-20T11:57:00.000-07:00

I have been using the VCRC ceramic bottom bracket, along with alloy stem, bars and the carbon seat post on my cross bike.......very nice stuff will buy more

Guy Smith

Hope all is going well. Just wanted to drop a line to say "hi" and thanks. Sadly broke by bike (frame cracked near BB) so they [SCOTT] warranted it and when I took off the cranks to swap things out your ceramic BB were unbelievable PERFECT! I don't know if they have been getting better as time goes on but your recent stuff is incredible. They are so smooth.

Anyhow, just wanted to say thanks again for all the help and support. We love your stuff!

Take care,
Joe B

I just built up my new Ridley Excaliber using the stem and bars you sent me. They look awesome.

Darrell Cunningham

Orlando Velo

The ceramic bb is a huge improvement over the stock SRAM GXP. Before the cranks barely made 1.2 revolutions with the bike in the stand when I let go of the pedals and now they keep spinning.

Matt, VT

Your seatpost and BB30 bearings are amazing.

Todd Nix

I just wanted to let you guys know, I received my order today, ceramic FSA BB red, carbon cages and pulleys. This stuff is sick, I can already see the difference in my BB spin and the cages are first rate, real quality! Everything is spinning smoothly" actually amazingly smoothly, I'm very impressed

Cheers,
Chris Mann

I purchased a bottom bracket in January and am very happy with it!

Tony Chandler

I've been using your bottom bracket and pulleys for a couple of months and the difference is unmistakable. Great Stuff!

Elan Walshe

I am a Cat 3 member of Team Cycleworks, one of your currently sponsored teams. Early in the race season, my performance was outstandingly mediocre, with most of my finishes in the middle of the field. On my very first race with your ceramic pulley, BB, and wheel bearings, I won by putting 2 minutes into the field. In the third race, I placed third in a difficult Criterium.

Thanks Velocarbon for the extra speed! I love your products!

Regards,
Arnold Galit
Team Cycleworks

At VCRC Bike we're obsessed with bikes, just like you!

2010-07-18T22:54:00.000-07:00

Founded in 2002, VCRC has always focused on our core consumer, the club racer and fast group riders. While we have provided parts for professional riders/teams, our true focus has been on race quality parts at prices that you can afford. We offer a focused product line, offering parts that we feel most racers should upgrade. Most stock bikes come with mid level components such as moderate quality handlebars, stems, seatposts, BBs, wheel bearings and so on. These are key areas to upgrade when speed counts. There is no point in racing on heavy, flexible, slow parts when it is so easy to upgrade to our parts and know you have race level equipment.

Our parts are readily available via our website and select dealers. We strive to provide a pleasant and easy shopping experience. We respond to email round the clock, sometimes within minutes but most of the time with 1-2 hours. There are exceptions to this, we do sleep occasionally and we also ride a lot just like you.

We believe in an easy return policy, we ship incredibly fast and we love to help with tech questions. You can try to stump us if you'd like, we like the challenge. We ride all the parts we sell so we are extremely familiar with our products should you have a question or concern. We're here for you!

21 Days In July Sale

2010-07-12T14:25:00.001-07:00

Quite an exciting Tour so far

2010-07-12T14:22:00.000-07:00

Well the first week of the Tour was not disappointing! Lots of crashes and drama has this Tour poised to be the best in several years. To celebrate this year's Tour De France, we are having quite a sale. Take 21% off your order of $200+. You can read all the details and get the coupon code here: https://www.vcrcbike.com/Articles.asp?ID=160

New Product Release

2010-06-01T17:08:00.001-07:00

We just released our new 2010 VCRC Team Stem to match our 2010 VCRC Team bars. This stem is a little heavier than our 2010 VCRC Pro stem as the VCRC Team Stem puts an emphasis on stiffness rather than weight savings. Overall the weight is respectable and well worth the trade for stiffness for the sprinter types and larger riders who really pull on the bars when sprinting or climbing.

More info can be found here: http://www.vcrcbike.com/ProductDetails.asp?ProductCode=2010teamstem

My SRAM BB has play!

2010-04-05T17:42:00.001-07:00

A quick check of the more popular cycling message boards will reveal this gets written A LOT! It is probably our most asked question of any product we've ever sold. Why does my SRAM (or any GXP) BB have play in it? And it's not just our SRAM BB, it is any and all SRAM (GXP style) BBs.

The reason is simple, you didn't install it properly. Some customers scoff at that and say it must be the BB or the bearings themselves, but it's not. Play does not come from the bearings being worn/bad like older BBs where the spindle was part of the BB. The change to integrated spindles about 5-7 years ago was in part to fix this. Play now is caused by loose/mis-installed cranks.

And the biggest culprit is the GXP style BB. But why?

From SRAM: "The GXP system captures the left side bearing between the spindle and the left crankarm while allowing the drive-side bearing to float axially on the spindle, thereby eliminating the necessity to side-load bearings during adjustment."

Sounds great in theory as this design takes the load off the drive side bearing which usually takes the bulk of abuse from being ridden. The GXP design strives to save the drive side bearing from an early failure.

But in practice it's a headache if you don't have experience and the patience to properly install. It's not as simple as installing the cranks and torquing everything down tight. In fact, you might have to repeatedly remove and install the cranks to remove play. The GXP design uses a stepped down spindle which means the non drive side of the spindle tightens against the non drive bearing from the inside (other designs like Shimano's see the bearings tighten up against from the outside). If the width of your BB shell is off either way (too narrow or too wide) issues will creep up.

If there is play in the crank, the left arm is not fully bottomed out. Remove the arm, regrease the splines (with a heavy grease) and reinstall. But you better use a torque wrench because the non drive crankarm bolt needs roughly 54nm of torque. Not sure how much that is? Shimano 10 cranks use 1.5nm of torque! That's quite a difference.

We've heard of mechanics having to remove/re-install up to 6 times to remove play. Someone somewhere probably has done more than that. And add in the issue of the non drive crankarm bolt loosening with use and we've now got real problems. So even if you can remove play, it can come back as you ride because the bolt loosens. We've found Loctite on the threads helps with this.

But that's not all. We have seen some variation in the tolerance of GXP crankarms. Small tolerance variation in the spindle results in a less than tight fit between the crank spindle/non drive bearing interface. Heavy grease seems to fix this for a period of time but if the spindle has been worn or was made slightly out of spec at the factory you'll have to re-torque even more than normal.

So the next time you have play in your SRAM (GXP) cranks, don't blame the BB! Instead get some grease and get ready to get dirty because you got some greasing and torquing to do! Better check the facing of your frame as well. Most frame makers do NOT do this for you and it is essential to your external BB working properly. You want a square 68mm (or 70mm Italian) BB shell. Without that, anything goes!

If you absolutely cannot remove the play, you most likely have a width issue in the BB shell and you will have to add spacers to widen the BB.

New website launched

2010-03-30T20:22:00.000-07:00

After almost 8 years of operation, our old website was put to rest last week. It served us well and kept on trucking long after it should have. But the time came to upgrade to a newer, more powerful site.

The new site has many new features such as:

the ability to search for a product
create an account
email friends products of interest
quicker, easier checkout system
improved security
easier navigation
and much more!

We will be releasing several new products in the next week or two to celebrate the new website! Keep checking the site and this blog for the latest news!

Different BB types

2010-03-22T14:28:00.000-07:00

There seems to be a new BB standard releasing every other month these days. Well, not quite that many but there are a LOT of different BB types today. In this post, we will try to explain them.

It is important to understand there are several different crank specs combined with several different frame specs.

First are the popular crank types, we will cover the 4 most popular:

Each of these require it's own type of BB.

1. Shimano 10 Speed.

2. SRAM (GXP)

3. Campy Ultra Torque

4. FSA Mega Exo.

We get a lot of questions asking if one of the above cranks is compatible with another crank's BB. The short answer is no. The first three are strictly incompatible with each other, but some have had success using a Shimano 10 BB with a FSA Mega Exo crank and vice versa. Although this is not recommended as the two specs are not 100% compatible without some modifications (as we have done to our VCRC FSA BB).

Add in the confusion of FSA having a standard model of cranks and a "Light" model of cranks (with each requiring it's own type of BB) and it gets quite complicated.

Each of the above manufacturers use a slightly different version of the same design. They all use integrated spindles. But they all implement it differently. This is in part because of patent issues and partly to be different from each other. For example, Shimano doesn't want you to use their crank with a SRAM BB and so on.

In the past few years, many frame companies decided that having a normal thread in type BB was not optimal. This led to the industry moving to press in type systems. There are many different press in designs now being used by most top manufacturers. They are:

1. BB90 (found on Trek mostly but also others)

2. BB86 (found on some Giant and Scott frames)

3. BB30 (developed by Cannondale and now adopted by quite a few companies).

Now it starts to get confusing. The 4 crank types listed above all need their own implementation of the BB90 or BB86 system. So if you have a Shimano 10 crank with BB90 or BB86 and want to switch to a SRAM crank, you can't use your BB90/Shimano or BB86/Shimano kit. You'd need a BB90/SRAM or BB86/SRAM kit.

What about BB30? Well it was first developed for use with Cannondale cranks using a 30mm spindle (most road spindles are 24mm). So none of the 4 cranks listed above work directly with BB30. You can buy a specific BB30 crank from FSA and SRAM (not available with Shimano or Campy cranks). You can also convert a BB30 frame to work with the 4 cranks above by purchasing our VCRC BB30 adapter.

Confused? We didn't even get into MTB and their slight variations on things. Maybe next time.

Seal Drag, Is it a problem?

2010-03-12T07:41:00.000-08:00

Is it real? Most doubters of ceramic bearings claim what you feel with ceramic bearings is just better seals with less drag. That is partially correct. Our Ceramic bearings are more resistant to contamination so the seals can be lighter than what a steel bearing needs. Seal drag is real (though minor) and lighter seals make a small difference. Although that is not why ceramic bearings are faster.

Every time we hear a "forum expert" say ceramic bearings aren't any better than steel, they always talk about the seals being the only difference. First, we wonder if they've ever ridden a good ceramic bearing. Second, they are missing the entire point of ceramic bearings. The lighter seals are a nice byproduct, but not the reason for the better performance.

A common question about steel bearings is "why does my crank only spin once or twice?" "Experts" will say don't worry about seal drag because when you ride it goes away. Partly true, but if your crank only spins 1-3 revolutions compared to a ceramic that might spin 20, which would you rather ride?

Because of our ceramic bearings being less prone to contamination, not only can the seals be tweaked for less resistance, but so can the grease. We use a special grease that offers enough lube but also is light enough to allow the bearing to spin freely. So you have better seals and better grease in our bearings. But that is still not why our bearings are faster than steel, but it certainly is part of it.

The biggest reason our ceramic bearings are faster than steel is the ceramic balls and races we use. Our ceramic balls are among the best grade available (made by the top ceramic ball company in cycling) and our races are specially designed to match our balls. By using a near perfect ball (roundness) and a matched race, the bearing creates an extremely hard spinning surface when loaded (ridden). The balls create no heat or friction and combined with the race spin on a glass like surface.

This all adds up to near zero friction in the bearing. Most riders who switch to our ceramic bottom bracket notice an increase in cadence in the same gear. Most riders who switch to our ceramic bearings in their wheels notice an increase in speed but also the ability to hold their speed while coasting in a paceline (think about that next time you are barely hanging on in a race). And some riders notice they attack the field and solo away for the win!

Spring is new product launch time!

2010-03-08T23:06:00.000-08:00

Just today we have launched our new 2010 PRO Stem. It is light and pretty and sure to make you ride faster. Only a fast rider deserves such a pretty stem. Over the next 6 weeks we will be releasing a bunch of new products. We will launch our 2010 PRO handlebars, followed by the 2010 TEAM bars. We have a new PRO Carbon seatpost releasing shortly after that. Next will be the TEAM stem and TEAM seatpost. Sprinkle in some new ceramic goodies and we have quite a spring ahead of us. Stay tuned....

What is a sealed bearing?

2010-02-16T10:29:00.000-08:00

There is a lot of confusion about bearings. Not just the difference between ceramic and steel, but the design of the bearing in general. We will be posting several articles clearing up some common mistakes with regards to bearings.

First up is the misunderstanding of a "sealed" bearing. Many people think sealed means the bearing is permanently sealed, both from contamination and from needed maintenance. This is not true. While some low end bearings come with metal shields making removal a difficult process, most quality bearings come with rubber seals often referred to as "2RS". This stands for 2 rubber seals.

Our VCRC Ceramic bearings use rubber seals which can easily be removed for servicing (greasing and if needed, cleaning) and reinstalled.

This is also true for steel bearings that use rubber seals. Don't think that just because they are "sealed" it means they don't need maintenance. Bearings are like chains, you need to keep them lubed and clean for them to last. A VCRC Ceramic bearing will last longer than steel when properly maintained as the parts don't wear as easily as steel, but the longevity has a lot to do with proper maintenance.

Testimonial Page

2010-02-15T20:11:00.001-08:00

We have a new testimonial page at our website where we post user comments:

http://www.velocarbon.com/testimonials.html

Awesome Order!

2010-02-15T19:19:00.000-08:00

I just wanted to let you guys know, I received my order today, ceramic FSA BB red, carbon cages & pulleys. This stuff is sick, I can already see the difference in my BB spin and the cages are first rate, real quality.

Cheers,

Chris

We're back

2010-02-15T19:18:00.000-08:00

We took a hiatus from our blogging but we're back. Look for interesting articles and more!

Become a Facebook Fan!

2010-02-15T19:17:00.001-08:00

Become a fan on Facebook!

http://www.facebook.com/VCRCBike

VCRC does Twitter

2009-06-14T16:19:00.001-07:00

http://twitter.com/vcrcbike

One happy customer!

2009-06-06T22:47:00.000-07:00

I received the new pulleys and installed them early this week. They areflawless. The spacing is perfect for SRAM - I have theForce derailleur. They are as quiet as the stock ones (and less noisy then the older version - which I had). These are a super addition.

Your BB is the best, and the wheel bearings make a much bigger difference then all the "literature" says (I think this is because most tests on wheels is done "unloaded" so the difference between steal and ceramic bearing doesn't show as much) but under a load (which wheels always have - there IS a big difference). These pulleys really complete the package.

Thanks again for all the support,
Take care,
Joe

New products on the horizon

2009-06-02T12:15:00.000-07:00

We are in full test mode for some new products that will released later in 2009 and 2010.

Some of the exciting new products are a new version of our popular ceramic pulleys. We have replacement hoods being tested. We are testing several brands of chains that may be released.

Oh yeah, and CARBON! We are jumping back into carbon and it is going to be BIG! For those of you who remember back in 2003-2005 we offered a nice lineup of carbon bars, stems and seatposts. Well, we are going back to our roots a bit and will be releasing new 2010 models. We are testing a 190g carbon bar and much more!

Ceramic BB86 Kits in final testing

2009-05-27T17:08:00.000-07:00

Our new ceramic BB kits for BB86 are almost ready! These kits will fit new Giant and Scott frames that use Shimano's BB86 press in cups.

New 2009 Wheels

2009-05-10T15:53:00.000-07:00

When a manufacturer releases a new model wheel, we try to provide ceramic upgrades asap. But sometimes we do not have access to all of the new wheels released each year.

So, this is where you come in. We are looking for owners of new model year 2009 wheels that we do not have in our database. We will offer a 25% discount on a bearing upgrade kit if you contact us and provide bearing specs for your 2009 wheels. Please note that we have many 2009 specs already so please contact us in advance to see if we need the specs for your wheels before taking your hubs apart.

We still need some specs on certain Mavic, Rolf, FSA, and more.

White is all the rage

2009-04-29T09:21:00.001-07:00

The trend in handlebars and stems has been white in recent years. Much like frames, nothing looks as good as a set of clean white handlebars and stem. In January we released our 2009 white bars and stem. The response has been amazing! In the past we focused on lightweight handlebars but for 2009 we listened to feedback from all of the teams that we sponsor. While lightweight is great, they wanted something geared towards them, the racer. Any racer knows that stiffness and strength, particualrly in the handlebar/stem area, is of great importance. It is so easy to build a 15 lbs. bike these days, there is no reason to sacrifice stiffness in the cockpit.

We sold through our 2009 Team bar so fast, we only have a few left. We have marked these down to only $29.95. Once they are gone, they are gone, so don't miss out.

Clearance Ceramic BB

2009-04-25T08:17:00.000-07:00

We have posted some of our 2009 Shimano 10 Ceramic BBs on sale. This batch of cups came from our factory with small imperfections in the cup finish. The bearings are not effected. These can be had for a cool $99.95.

First Class Products

2009-04-22T06:40:00.000-07:00

Gentlemen, I just wanted to drop you a note. Your products are first class and the shipping was very fast.

Thanks,
Terry
Scarletfire Racing
VCRC Sponsored Team

Hmmm?

2009-04-21T17:08:00.000-07:00

More Positive Feedback...even from a USPRO National Champion!

2009-04-21T16:59:00.000-07:00

Feedback-
"I really think that the Bearings are noticeable. (Mike) Creed and I both noticed it!" Brad Huff - 2006 USPRO National Criterium Champion, Slipstream Chipolte

"I am a Cat 3 member of Team Cycleworks, one of your currently sponsored teams. Early in the race season, my performance was outstandingly mediocre, with most of my finishes in the middle of the field. On my very first race with your ceramic pulley, BB, and wheel bearings, I won by putting 2 minutes into the field. In the third race, I placed third in a difficult Criterium.

Thanks Velocarbon for the extra speed! I love your products!"

Regards,
Arnold Galit
Team Cycleworks
VCRC Sponsored Team

1 GEAR EASIER!

2009-04-21T15:10:00.000-07:00

"With the cranks, wheels and pulleys it's like I am in 1 gear easier."

Gregory Colyer
Taleo Racing
VCRC Sponsored Team

Coupon! Coupon!

2009-04-21T13:14:00.000-07:00

Take $25 off all orders over $100: enter code 25cash in the voucher box when checking out.

Coupon code must be presented at time of purchase and cannot be applied to previous purchases. Coupon cannot be combined with any other offer; does not include gift cards. Discount does not apply to shipping, handling or taxes. Offer is good via website only. $100 minimum required.

How fast is VCRC Ceramic?

2009-04-21T13:05:00.000-07:00

Team Bike

2009-04-21T12:57:00.000-07:00

Here are a couple of nice pictures sent in from Darrell, a member of our sponsored team Volvo Cycling / Orlando Velo.

The VCRC products in use are:

VCRC White Stem

VCRC White Bars

VCRC Carbon Bottle Cages

VCRC Ceramic Pulleys

VCRC Ceramic Wheel Bearings.

Nice write up on our new white alloy products

2009-04-21T12:48:00.000-07:00

Here is a nice article about our new white alloy products.

http://www.truesport.com/rzone/articles/article.asp?recid=899

What's new?

2009-04-21T12:02:00.001-07:00

Welcome to our new blog. We have some exciting new items that we are almost ready to introduce to you. When they are ready, we will post them here!